1-20 of 705 items

Instrumentation and Thermocouple Cable

Instrumentation cable is generally used to transmit a low-power signal from a transducer (measuring for example, pressure, temperature, voltage, flow, etc.) to a PLC or DCS process control computer or to a manually operated control panel. It is normally available in 300- or 600-volt constructions with a single overall shield, or with individual shields over each pair (or triad) and an overall shield.

Thermocouple wire is available in either thermocouple grade or extension grade. Extension grade wire is recommended for use in connecting thermocouples to the sensing or control equipment. The conditions of measurement determine the type of thermocouple wire and insulation to be used. Temperature range, environment, insulation requirements, response and service life should be considered. Shop thermocouple wires including Type J, Type K, Type T, Type E, Type N.

In Stock

Power Limited Tray Cable, 4 Pairs, 18 AWG, 7x26 Strands, 600V, Bare Copper, PVC Jacket

BELDEN

MFR PART #  1064A 0107500

PART #  2AS-1804POS-B


Minimum 150 FEET

In Stock

Power Limited Tray Cable, 1 Pair, 16 AWG, 19x29 Strands, 300V, Tinned Copper, PVC Jacket

BELDEN

MFR PART #  9316 0605000

PART #  323-023-1601-B


Minimum 150 FEET

In Stock

Power Limited Tray Cable, 1 Pair, 18 AWG, 19x30 Strands, 300V, Tinned Copper, PVC Jacket

BELDEN

MFR PART #  9318 06010000

PART #  323-023-1801-B


Minimum 150 FEET

In Stock

18-2T STR TNC XLP/PVC IO SHD AIA 105C DRY/90C WET 300V GRY CSA#239 FT4 HL

APPROVED MANUFACTURERS

PART #  323-779-1802


Available in 1 METRE increments
Minimum 1 METRE

In Stock

In Stock

18-12T STR TNC XLP/PVC IO SHD AIA 105C DRY/90C WET 300V GRY CSA#239 FT4 HL

APPROVED MANUFACTURERS

PART #  323-779-1812


Available in 1 METRE increments
Minimum 1 METRE

In Stock

18-16T STR TNC XLP/PVC IO SHD AIA 105C DRY/90C WET 300V GRY CSA#239 FT4 HL

APPROVED MANUFACTURERS

PART #  323-779-1816


Available in 1 METRE increments
Minimum 1 METRE

In Stock

18-4T STR TNC XLP/PVC IO SHD AIA 105C DRY/90C WET 300V GRY CSA#239 FT4 HL

APPROVED MANUFACTURERS

PART #  323-779-1804


Available in 1 METRE increments
Minimum 1 METRE

In Stock

18-24T STR TNC XLP/PVC IO SHD AIA 105C DRY/90C WET 300V GRY CSA#239 FT4 HL

APPROVED MANUFACTURERS

PART #  323-779-1824


Available in 1 METRE increments
Minimum 1 METRE

In Stock

18-6T STR TNC XLP/PVC IO SHD AIA 105C DRY/90C WET 300V GRY CSA#239 FT4 HL

APPROVED MANUFACTURERS

PART #  323-779-1806


Available in 1 METRE increments
Minimum 1 METRE

In Stock

In Stock

In Stock
1-20 of 705 items

Instrumentation and Thermocouple Cable

Instrumentation cable is generally used to transmit a low-power signal from a transducer (measuring for example, pressure, temperature, voltage, flow, etc.) to a PLC or DCS process control computer or to a manually operated control panel. It is normally available in 300- or 600-volt constructions with a single overall shield, or with individual shields over each pair (or triad) and an overall shield.

Thermocouple wire is available in either thermocouple grade or extension grade. Extension grade wire is recommended for use in connecting thermocouples to the sensing or control equipment. The conditions of measurement determine the type of thermocouple wire and insulation to be used. Temperature range, environment, insulation requirements, response and service life should be considered. Shop thermocouple wires including Type J, Type K, Type T, Type E, Type N.