Instrumentation and Thermocouple Cable
Instrumentation cable is generally used to transmit a low-power signal from a transducer (measuring for example, pressure, temperature, voltage, flow, etc.) to a PLC or DCS process control computer or to a manually operated control panel. It is normally available in 300- or 600-volt constructions with a single overall shield, or with individual shields over each pair (or triad) and an overall shield.
Thermocouple wire is available in either thermocouple grade or extension grade. Extension grade wire is recommended for use in connecting thermocouples to the sensing or control equipment. The conditions of measurement determine the type of thermocouple wire and insulation to be used. Temperature range, environment, insulation requirements, response and service life should be considered. Shop thermocouple wires including Type J, Type K, Type T, Type E, Type N.
Instrumentation and Thermocouple Cable
Instrumentation cable is generally used to transmit a low-power signal from a transducer (measuring for example, pressure, temperature, voltage, flow, etc.) to a PLC or DCS process control computer or to a manually operated control panel. It is normally available in 300- or 600-volt constructions with a single overall shield, or with individual shields over each pair (or triad) and an overall shield.
Thermocouple wire is available in either thermocouple grade or extension grade. Extension grade wire is recommended for use in connecting thermocouples to the sensing or control equipment. The conditions of measurement determine the type of thermocouple wire and insulation to be used. Temperature range, environment, insulation requirements, response and service life should be considered. Shop thermocouple wires including Type J, Type K, Type T, Type E, Type N.
Instrumentation and Thermocouple Cable
Instrumentation cable is generally used to transmit a low-power signal from a transducer (measuring for example, pressure, temperature, voltage, flow, etc.) to a PLC or DCS process control computer or to a manually operated control panel. It is normally available in 300- or 600-volt constructions with a single overall shield, or with individual shields over each pair (or triad) and an overall shield.
Thermocouple wire is available in either thermocouple grade or extension grade. Extension grade wire is recommended for use in connecting thermocouples to the sensing or control equipment. The conditions of measurement determine the type of thermocouple wire and insulation to be used. Temperature range, environment, insulation requirements, response and service life should be considered. Shop thermocouple wires including Type J, Type K, Type T, Type E, Type N.
-
1.5MM/1TR BS5308 PT1 TY2 XLPE/COLLSCRN/LSZH/SWA/LSZH BLK 7/0.52MM
APPROVED MANUFACTURERS
PART # A7DI2-0001TLF-02
Minimum 1 METREView All: Instrumentation and Thermocouple Cable
-
0.8MM/40PR (1/0.8MM) PE/LSZH/ SWA/LSZH BLK GEN. ENATS 09-6 ISS 8 TABLE E.3B
APPROVED MANUFACTURERS
PART # A11BP-P040LSF
Minimum 1 METREView All: Instrumentation and Thermocouple Cable
-
16-1P SOL XLP/CPE THERMOCPL KXXLP O/A FOIL SHD CPE YEL JKT 600V 90C UL TC YL/RD
APPROVED MANUFACTURERS
PART # 2XR-1601POS-KX
Minimum 1 FEETView All: Instrumentation and Thermocouple Cable
-
0.75 MM SQUARED, 10 PAIR, BS5308 PT1 TYPE 2 OVERALL SHIELD COLOR BLUE REDUCED PROPAGATION <15% 24/0.2 MM
APPROVED MANUFACTURERS
PART # A7-M32-0010LF
Minimum 1 METREView All: Instrumentation and Thermocouple Cable
-
Power Limited Tray Cable, 4 Pairs, 16 AWG, 7x24 Strands, 300V, Bare Copper, PVC Jacket
BELDEN
MFR PART # 1484A 0107500
PART # 323-221-1604-B
Minimum 1 FEETView All: Instrumentation and Thermocouple Cable
-
Power Limited Tray Cable, 2 Pairs, 18 AWG, 7x26 Strands, 300V, Bare Copper, PVC Jacket
BELDEN
MFR PART # 1474A 0107500
PART # 323-231-1802-B
Minimum 1 FEETView All: Instrumentation and Thermocouple Cable
-
0.75 MM SQUARED, 1 PAIR, BS5308 PT1 TYPE 2 OVERALL SHIELD COLOR RED REDUCED PROPAGATION <15% 24/0.2 MM COMES WITH RIP CORD
APPROVED MANUFACTURERS
PART # A7-M32-0001LFR-03
Minimum 1 METREView All: Instrumentation and Thermocouple Cable
-
0.75 MM SQUARED, 20 PAIR, BS5308 PT1 TYPE 2 OVERALL SHIELD COLOR BLUE REDUCED PROPAGATION <15% 24/0.2 MM
APPROVED MANUFACTURERS
PART # A7-M32-0020LF
Minimum 1 METREView All: Instrumentation and Thermocouple Cable
-
1.5 MM SQUARED, 2 PAIR, BS5308 P1 T2 BARE COPPER, PE, INDIVIDUALLY AND OVERALL SHIELD, LOW SMOKE ZERO HALOGEN, STEEL WIRE ARMORED, LOW SMOKE ZERO HALOGEN COLOR BLUE 7/0.53 MM PAIR COLORS: BLUE AND BLACK
APPROVED MANUFACTURERS
PART # A7CS2-P002L
Minimum 1 METREView All: Instrumentation and Thermocouple Cable
-
1.5MM/20PR BS5308 PT1 TYPE 1 IND AND COLL SCREEN BLACK RP157/0.53MM BLU/BLK PRS
APPROVED MANUFACTURERS
PART # A7-V61-0020LF-02
Minimum 1 METREView All: Instrumentation and Thermocouple Cable
-
0.75 MM SQUARED, 5 PAIR, BS5308 PT1 TYPE 2 OVERALL SHIELD COLOR BLACK REDUCED PROPAGATION <15% 24/0.2 MM
APPROVED MANUFACTURERS
PART # A7-M32-0005LF-02
Minimum 1 METREView All: Instrumentation and Thermocouple Cable
-
Multi-Conductor - 600V Tray Cable 8-Pair 18 AWG PVC/NYL FS PVC Black
BELDEN
MFR PART # 1065A 0107500
PART # 2AS-1808POS-B
Minimum 1 FEETView All: Instrumentation and Thermocouple Cable
-
Power Limited Tray Cable, 16 Pairs, 20 AWG, 7x28 Strands, 300V, Bare Copper, PVC Jacket
BELDEN
MFR PART # 1059A 0105000
PART # 323-221-2016-B
Minimum 1 FEETView All: Instrumentation and Thermocouple Cable
-
Power Limited Tray Cable, 4 Pairs, 18 AWG, 7x26 Strands, 300V, Bare Copper, PVC Jacket
BELDEN
MFR PART # 1475A 0105000
PART # 323-231-1804-B
Minimum 1 FEETView All: Instrumentation and Thermocouple Cable
-
18-5 STR BC PVC TPE JKT YEL 300V 105C
LUMBERG AUTOMATION
MFR PART # 909794
PART # 909794
Minimum 1 FEETView All: Instrumentation and Thermocouple Cable
-
Power Limited Tray Cable, 1 Pair, 16 AWG, 7x24 Strands, 300V, Bare Copper, PVC Jacket
BELDEN
MFR PART # 1030A 01010000
PART # 323-221-1601-B
Minimum 1 FEETView All: Instrumentation and Thermocouple Cable
-
Power Limited Tray Cable, 3 Pairs, 16 AWG, 7x24 Strands, 300V, Bare Copper, PVC Jacket
BELDEN
MFR PART # 1528A 0107500
PART # 323-221-1603-B
Minimum 1 FEETView All: Instrumentation and Thermocouple Cable
-
1.5MM/5PR BS5308 PT1 TYPE 1 PCU/PE/COLL SCRN/LSZH BLK 7/0.53MM
APPROVED MANUFACTURERS
PART # A7BT1-P005L-02
Minimum 1 METREView All: Instrumentation and Thermocouple Cable
-
0.75 mm squared, 10 pair, BS5308 PT1 type 1 individually and overall shield color blue reduced propagation <15% 24/0.2 mm Pair colors: blue and black
APPROVED MANUFACTURERS
PART # A7-W71-0030LF
Minimum 1 METREView All: Instrumentation and Thermocouple Cable
-
Power Limited Tray Cable, 1 Pair, 20 AWG, 19x32 Strands, 300V, Tinned Copper, PVC Jacket
BELDEN
MFR PART # 9320 0605000
PART # 323-023-2001-B
Minimum 1 FEETView All: Instrumentation and Thermocouple Cable