|Cable O.D. (in.):||0.21|
|Cable O.D. (mm):||5.3|
|Cable O.D. Min. (mm):||0.20 in. (5.0 mm)|
|Cable Type:||TIGHT BUFFERED|
|Fiber Type:||OS2 SINGLE-MODE|
|Max. Tensile Load Installation (lb.):||100|
|Max. Tensile Load Installation N:||440|
|Max. Tensile Load Long Term. (lb.):||30|
|Max. Tensile Load Long Term. N:||132|
|Min. Bend Radius Installation (cm):||8.0|
|Min. Bend Radius Installation (in.):||3.2|
|Min. Bend Radius Long Term (cm):||2.7|
|Min. Bend Radius Long Term (in.):||1.1|
|No. of Fibers:||6|
Corning Cable Systems MIC Plenum Cables are designed for use in plenum, riser and general purpose environments for intrabuilding backbone and horizontal installations. These multifiber cables use 900 µm TBII Buffered Fibers to allow easy, consistent stripping and to facilitate termination. The fibers are surrounded by dielectric strength members and protected by a flame-retardant outer jacket.
The all-dielectric cable construction requires no grounding or bonding. MIC Plenum cables are ideal for routing inside buildings, within plenum areas and riser shafts, to the telecommunications rooms and workstations. The MIC Plenum Cables meet the application requirements of the National Electrical Code (NEC) Article 770 and are OFNP and FT-6 listed.
This cable is available in 12 different jacket colors - blue, orange, green, brown, slate, white, red, black, yellow, purple, rose and aqua. The colored jacket allows for easy visual identification of the cables.
General Purpose Horizontal, Vertical Riser, PlenumSpecifications
Approval and Listings: National Electrical Code (NEC) OFNP, CSA FT-6, ICEA S-83-596; Flame Resistance: NFPA 262 (for plenum, riser and general building applications)
We are currently experiencing technical difficulties. We apologize for the inconvenience, and are working to quickly resolve it. Please contact your local Anixter representative for immediate assistance.