OBERON | 1076-AP215
3" Deep Recessed AP Wall Mount - Aruba AP215

MFR PART #  1076-AP215
PART #  723147
Call for Availability


This locking enclosure provides a convenient way to mount and secure APs from leading vendor’s in the hard lid ceiling or wall. The access point mounts in the door, revealing only the antenna surface. Interchangeable retrofit doors permit vendor and te chnology migrations, and simplify moves, adds, and changes, Unique wall bridge simplifies installation. UL listed for installation in the plenum space. 15" square white steel bezel and door.

- (2) Wall bridges
- Universal access point "T-ba mounting bracket
- (4) No. 8-32 hex nuts
- (2) Keys for lock
- (1) Fireblock cable egress kit
- Installation Instructions


  • Locking recessed wall or hard ceiling mounting solution to secure wireless access points from most vendors
  • UL Listed and designed to meet NEC300-22 and 300-23 for plenum installations; approved for AC line power
  • Fully-hinged locking door, keyed alike
  • nterchangeable doors permit simple migration to new access points and antennas
  • Shallow back-box (3") simplifies installation in walls and ceilings
  • Enclosure back-box is effective dust barrier to simplify ICRA compliance in hospitals
  • OSHPD approved

Specification Description

15" x 15" white powder-coated steel flange and door
12.75" x 12.75" x 3" deep, galvanized steel back-box, RoHS compliant
Knockouts for single gang j-box, (2) keystone jacks, (2) 0.75" trade conduit connector
Maximum weight to be installed inside the uit is 25 lbs.
De-rate upper operating temperature limit from +50C to +40C when AP in the enclosure
Enclosure must be supported by the tile bridges; when installed in the ceiling, enclosure must be supported by the building structure, independent of the suspended ceiling


Nema Rating NO

Spec Sheet

Spec Sheet

Data Sheets