ABB | 1SVR427032R1000
DIN Mount Power Supply 85-264V AC/90-375V DC Input 12 V DC/2.5 A Output

MFR PART #  1SVR427032R1000
PART #  536885
Minimum 1 Each
In Stock


For Used Worldwide In High Fluctuating Networks And Battery-Powered Plants


  • Output voltage adjustable via front-face rotary potentiometer
  • Adjust Rated output current 2.5 A
  • Typical efficiency of 84%
  • Low power dissipation and low heating
  • Free convection cooling (no forced cooling with ventilators)
  • Ambient temperature range dug operation Minus 40 - 70 deg C
  • Open-circuit, overload and short-circuit stable
  • Integrated input fuse
  • LEDs for status indication
  • The primary switch mode power supply offers two voltage input ranges. This enables the supply with AC or DC
  • Equipped witwo generous capacitors, which ensure mains buffering of at least 75 usec (At 230 V AC)

Specification Description

Voltage Rating: Input: 85 - 264 V AC/90 - 375 V DC, Output: 24 V DC
Amperage Rating: Input: 560 mA At 115 V AC, 330 mA At 230 V AC, Output: 2.5 A At Less Than Or Equal To 60 deg C
Wattage: 30 W
Frequency Rating: 47 - 63 Hz
Phase: 1 PH
Fuse Rating: 2At 250 V AC Slow Acting
Material: Plastic Housing
Efficiency: 84 %
Insulation: Rated Insulation Voltage Ui: Input/Output - 3 kV AC, Input/PE - 1.5 kV AC
Cable Size: Fine Strand With/Without Wire End Ferrule And Rigid: 24 - 14 AWG (Input/Output)
Enclre: IP20
Environmental Conditions: Operating Temperature: -40 To 70 deg C, Rated Load: -40 To 60 deg C, Storage Temperature: -40 To 85 deg C, Damp Heat: 95 % RH, Without Condensation
Width: 40.5 mm
Height: 90 mm
Depth: 114 mm
Power Failure Bufferingme: 20 msec At 115 V AC, 30 msec At 230 V AC
Discharge Current: Input/Output: 0.25 mA, Input/PE: 3.5 mA
Control Time: Less Than 2 msec
Power Consumption: 35.9 W
Tightening Torque: 0.6 N-m
Inrush Current Limiting: 20 A At 115 V AC, 40 A At 230 V AC
Strip Length: 6 mm
Rise Time: 150 msec At Rated Load, 500 msec With 3500 uF
Capacitive Load: 3500 uF

Tech Info

C/US UL 508, 1310, 60950 Listed, CAN/CSA C22.2, CE, GOST Certified, IEC/EN 61204, EN 50178, EN 60950, IEC/CISPR 22, EN 55022: Class B Approved, RoHS Compliant


UNSPSC Code 39121004

Spec Sheet

Spec Sheet

Shipping and Fulfillment Policy

When you order products from, the order is processed within one to two business days. Orders received during non-business days are processed on the next business day.

You have several shipping options for parcel shipping: standard ground 5 to 7 business days, 2 to 3 business days, or next business day. orders ship to addresses within the United States. orders do not currently ship to addresses outside the United States or military/government APO/FPO locations. We are also not able to ship to Post Office Box addresses. If you wish to ship to an address outside the United States or a military/government location, please contact your local Anixter sales representative to discuss your options.

In addition, offers Less-Than-A-Truckload “LTL” option for products that cannot be shipped via parcel shipping. For products that will be shipped via LTL, you will be provided with a set of Accessorials to select from to provide Anixter with additional shipping considerations, such as residential delivery, inside delivery, liftgate or limited access.

  • Residential Delivery - A residential delivery charge applies to shipments to a home or private residence, including locations where a business is operated from a home, or to any shipment in which the shipper has designated the delivery address as a residence.
  • Inside Delivery - When requested, freight carrier unloads shipments from or to areas that are not next to the trailer, such as shopping malls or office buildings. An elevator must be available to provide service to floors above or below the trailer.
  • Liftgate - Freight carrier provides liftgate service, if needed, to load and unload a shipment when loading/unloading docks are not available.
  • Limited Access Locations - A limited access location is a site where pickup or delivery is restricted or limited.

Shipping charges are calculated based on the shipping option you select, and is prepaid by you at the time of shipment.