TRIPP LITE | APS INT2424 | 37332090324
2400W APS INT Series 24VDC 230V Inverter/Charger with Auto-Transfer Switching, Hardwired

MFR PART #  APS INT2424  | 37332090324
PART #  565052
Minimum 1 EACH
Call for Availability

Features

  • Supports 230 Volt AC output from a 230 Volt AC line power source or 12 Volt DC battery source

Specification Description

Inverter/Charger With Auto-Transfer Switching
Frequency Compatibility: 50 Hz
Output: 2400 Watt
Continuous Output Capacity: 2400 Watt
Peak Output Capacity (Watt): 4800 Watt
Output Nominal Voltage: 230 Volt
Output Voltage Regulation: Line Power (AC): Maintains 230 Volt Nominal Sine Wave Output From Line Power Source. Inverter Power (AC): Maintains PWM Sine Wave Output Voltage of 230 Volt AC (+/-5%)
Output Frequency Regulation: 50 Hz (+/- 0.3 Hz)
Overload Protection: Includes 10 Amp Input Breaker Dedicated to the Charging System And 15 Amp Output Breaker for AC Output Loads
Nominal Input Voltage Supported: 230 Volt AC
Recommended Electrical Service: DC Input: Requires 24 Volt DC Input Source Capable of Delivering 112 Amp For the Required Duration (When Used at Full Continuous Capacity - DC Requirements Increase During Over Power And Double Boost Operation). For Automotive Applications, Professional Hardwire Installation With 300 Amp Minimum Battery System Fusing is Recommended
Maximum Input Amp/Watt: DC Input: Full Continuous Load - 112 Amp At 24 Volt DC. AC Input: 17 Amp At 230 Volt AC With Full Inverter And Charger Load (7 Amp Max Charger-Only/Combined Input Load To Support Charger And AC Output is Automatically Controllable To 66%-33%-0% Based On AC Output Loading Using the Charger Limiting Set Points
Input Connection Type: DC Input: Set of 2 DC Bolt-Down Terminals. AC Input: Hardwire Via Built-In Junction Box With Cover Plate
Voltage Compatibility: 230 Volt AC/24 Volt DC
Expandable Battery Runtime: Runtime is Expandable With any Number of User Supplied Wet or Gel Type Batteries
DC System Voltage: 24 Volt DC
Battery Charge: 30 Amp
Switches: 3 Position On/Off/Remote Switch Enables Simple On/Off Power Control Plus "Auto/Remote" Setting That Enables Distant On/Off Control of the Inverter System When Used in Conjunction With Optional APSRM4 Accessory When Used in Inverter Mode. In AC Uninterruptible Power Mode, "Auto/Remote" Setting Enables Automatic Transfer From Line Power to Battery Power - to Maintain Continuous AC Power to Connected Loads
Front Panel LEDs: Set of 6 LEDs Offer Continuous Status Information on Load Percentage (6 Levels Reported) And Battery Charge Level (7 Levels Reported)
Unit Dimensions (HxWxD): 7.25 Inch x 8.5 Inch x 16.25 Inch (18.42 cm x 21.59 cm x 41.28 cm)
Unit Weight: 38.2 lb (17.3 kg)
Cooling Method: Multi-Speed Fan
Material Of Construction: Polycarbonate
Form Factors Supported: Mounting Slots Enable Permanent Placement of Inverter on any Horizonta

Spec Sheet

Spec Sheet