1-20 of 708 items

Instrumentation and Thermocouple Cable

Instrumentation cable is generally used to transmit a low-power signal from a transducer (measuring for example, pressure, temperature, voltage, flow, etc.) to a PLC or DCS process control computer or to a manually operated control panel. It is normally available in 300- or 600-volt constructions with a single overall shield, or with individual shields over each pair (or triad) and an overall shield.

Thermocouple wire is available in either thermocouple grade or extension grade. Extension grade wire is recommended for use in connecting thermocouples to the sensing or control equipment. The conditions of measurement determine the type of thermocouple wire and insulation to be used. Temperature range, environment, insulation requirements, response and service life should be considered. Shop thermocouple wires including Type J, Type K, Type T, Type E, Type N.

In Stock

Power Limited Tray Cable, 4 Pairs, 18 AWG, 7x26 Strands, 600V, Bare Copper, PVC Jacket

BELDEN

MFR PART #  1064A 0107500

PART #  2AS-1804POS-B


Minimum 150 FEET

In Stock

Power Limited Tray Cable, 1 Triad, 16 AWG, 7x24 Strands, 300V, Bare Copper, PVC Jacket

BELDEN

MFR PART #  1031A 01010000

PART #  323-321-1601-B


Minimum 150 FEET

In Stock

Power Limited Tray Cable, 16 Pairs, 18 AWG, 7x26 Strands, 600V, Bare Copper, PVC Jacket

BELDEN

MFR PART #  1067A 0105000

PART #  2AS-1816POS-B


Minimum 250 FEET

In Stock

Power Limited Tray Cable, 15 Pairs, 18 AWG, 19x30 Strands, 300V, Tinned Copper, PVC Insulation, PCV Jacket

BELDEN

MFR PART #  9565 0601000

PART #  323-035-1815-B


Available in 100 FEET increments
Minimum 100 FEET

In Stock

Power Limited Tray Cable, 8 Traids, 20 AWG, 7x28 Strands, 300V, Bare Copper, PVC Jacket

BELDEN

MFR PART #  1084A 0107500

PART #  323-331-2008-B


Available in 150 FEET increments
Minimum 150 FEET

In Stock

In Stock

Power Limited Tray Cable, 16 Pairs, 18 AWG, 7x26 Strands, 600V, Bare Copper, PVC Jacket

BELDEN

MFR PART #  1052A 0102500

PART #  2AS-1816SPOS-B


Available in 250 FEET increments
Minimum 250 FEET

In Stock

Power Limited Tray Cable, 4 Pairs, 20 AWG, 7x28 Strands, 300V, Bare Copper, PVC Jacket

BELDEN

MFR PART #  1056A 01010000

PART #  323-221-2004-B


Available in 150 FEET increments
Minimum 150 FEET

In Stock

Power Limited Tray Cable, 3 Pairs, 16 AWG, 7x24 Strands, 600V, Bare Copper, PVC Jacket

BELDEN

MFR PART #  1037A 0107500

PART #  2AS-1603SPOS-B


Minimum 250 FEET

In Stock
1-20 of 708 items

Instrumentation and Thermocouple Cable

Instrumentation cable is generally used to transmit a low-power signal from a transducer (measuring for example, pressure, temperature, voltage, flow, etc.) to a PLC or DCS process control computer or to a manually operated control panel. It is normally available in 300- or 600-volt constructions with a single overall shield, or with individual shields over each pair (or triad) and an overall shield.

Thermocouple wire is available in either thermocouple grade or extension grade. Extension grade wire is recommended for use in connecting thermocouples to the sensing or control equipment. The conditions of measurement determine the type of thermocouple wire and insulation to be used. Temperature range, environment, insulation requirements, response and service life should be considered. Shop thermocouple wires including Type J, Type K, Type T, Type E, Type N.