Analog CCTV Video Receiver, Port One: Coax (BNC) (75 Ohm), Port Two: 850 nm Multimode (ST) [1 km/0.6 mi], LA

PART #  586238
Minimum 1 EACH
Call for Availability


Transition Networks analog composite video media transmitter, J/VD-TX-01, converts a CCTV signal from cameras to multimode or single-mode fiber for upto 10 km. Transition Networks analog video media receiver, J/VD-RX-01, converts the optical signal back to an analog composite video signal. All conversion is performed in real time. Automatic gain control installed on both transmitter and receiver maintains desired quality of video’s contrast and brightness for extended distances. No field adjustments are necessary. Wide input range power supply allows for multiple choices of power source including camera power supply. To assure best quality Transition Networks transmitters and receivers should be used on both ends of the link


Connect Uni-Directional Analog Video Devices Over Fiber


  • AM modulation
  • NTSC, PAL, SECAM compatibility
  • Compatible with all video CCTV equipment
  • Real time full color video
  • Automatic gain control on receiver
  • Link pass through
  • Wide input power supply

Specification Description

Item: Analog CCTV Video Receiver
Video Formats: NTSC, PAL, SECAM
Input Video: 0.5 - 2 Volt pk-pk (75 Ohm)
Bandwidth: 5 Hz - 10 MHz
Differential Gain: <5%
Differential Phase: <5 Degree
Tilt: <1%
Signal/Noise Ratio: 60 dB
Multimode: 850 nm: 3.0 dB Link Budget
LEDs: PWR: On=Power Connected; RX: On=Fiber Video Feed IN
Power Supply: 9 - 16 Volt AC/DC
Power Consumption: 2 Watt
Environmental Conditions: 0 to 50 deg C (32 to 122 deg F) Operating Temperature (Standard); -25 to 85 deg C Storage Temperature; 5 - 95% Operating Humidity Non-Condensing; 0 - 10000 ft Altitude
Port One: Coax (BNC) (75 Ohm)
Port Two: 850 nm Multimode (ST) [1 km/0.6 mi]
Dimension: 4.000 Inch Width x 3.000 Inch Depth x 1.000 Inch Height

Tech Info

CE Mark- Power Supply- UL Listed, EN60950- FCC Class A, EN55022 Class A- EN55024



Spec Sheet

Spec Sheet