ARLINGTON INDUSTRIES

Arlingtons The Loop. Hanger for communications cable, fiver optic cable and any low voltage cable. Versatile mounting, rotates to any angle. Can be stacked perpendicular or parallel. Loop size is 2-1/2". Listed for use in enviornmental in use spaces.

Arlingtons The Loop. Hanger for communications cable, fiver optic cable and any low voltage cable. Versatile mounting, rotates to any angle. Can be stacked perpendicular or parallel. Loop size is 5". Listed for use in enviornmental in use spaces.

Cable Hanger, Non-Metallic, 5" Loop, 5" Diameter, Plastic, White, For Communication Cable Support, Cat 5-Fiber Optic Cable

3/4" All Plastic snap-in type for knockouts.

Nail on, Single gang, Low Voltage mounting bracket for new construction on wood studs. Built in loop to tie off cable.

Steel fixtured box kit for suspended ceilings. With adjustable mounting bar. Preset for 24 in. Grid. Supports up to 50lb fixtures. 2 inch box depth, 20 cu. in.

Zinc die-cast, 1/2" knockout saddle-type connector w/ spring set screw for securing aluminum and steel cable. Provided w/ insulated throat. Supports 0.405 to 0.612 cable range w/ a 0.400 by 0.580 end stop diameter.

Insulating bushing, press fit, holds firmly in place while pulling cables. Can also be used for Rigid, IMC, and PVC rigid conduit. Trade Size 3"

Recessed indoor inbox for new and retrofit construction. 2 hour fire rating. Four Gang. White

Non Metallic 90 degree connector for use with non metallic liquid tight conduit type B only. 1" Trade Size.

Zinc die-cast, 90 degree 2 screw flex connector for aluminum and steel Flex. Secures into a 1" Knockout with a diecast locknut. Accommodates cable range 1.330 to 1.57.

Outdoor rated non-metallic enclosures, NEMA3R. Black, 12 x 12 x 4. With Back Plate

Steel 4x4 box for retrofit construction. Screw hole patterns for 4x4 and two gang devices. 27.5 cu. in. 2 Hour Fire Rating.6 lb rating for Walls, 10lb rating for ceilings.

Strut Clip for conduit on Arlingtons non metallic quicklatch pipe hangers. For 5/16" liquid tight or 1/2" copper tubing.

Cable Hanger, 25 Lb Load, 2-1/2", Plastic, White

EQUIP BOX W/BACKPLATE

White cover for the FBC42251W with 1/2" knockout in center.

Plastic, cable standoff features a positive lock to keep cables in place and positions cable 2" from a furring strip or 2x4 stud.

Zinc die-cast, 3/4" knockout saddle-type connector with spring set screw for securing aluminum and steel cable. Secures into knockout with a zinc die-cast. Concrete tight when taped. Supports .840 to 1.110 cable range with a .820 end stop diameter.

ARL NMLT9075 3/4 90D L/T CONN